Heat Resistance Sound Insulation High Hanging Force EPS Wall Panel
For Walls
A) Interior Partition
With EXCELLENT fireproof, best hanging force, sound insulation,
heat insulation, waterproof, easy installation
and the like characteristics.
B) Interior & Exterior Wall
Can automatically adjust indoor air and water content with the
season and climate changes, which can keep the
temperature at an invariable temperature level, and such ecology
effect just goes with the tide of modern residential
building. It is widely applied to various modular house, low
buildings, apartment, villas, and city house, etc
C) Roof
This system not only solves the problem of roof leakage, but also
has the advantages such as heat insulation,
neat joint surface, high temperature resistance, etc.
D) Floor
Can be innovatively used as floor board. This system has the
outstanding advantages such as high load-bearing
capacity, anti-static electricity, friction resistance, high
strength, convenient for wire groove and water pipe inbuilt,
corrosion resistance, no deformation, no split, etc.
Advantages:
1.Energy Saving, Excellent Performance
Heat Preservation: Major material for wall panel is anti-freezing, heat preserving
and environmental friendly.
Heat Insulation: Adjust the indoor temperature at a constant range.
Fire Proof: Both face sides with 5mm calcium-silicon fire proof board, thus
Eps and Cement sandwich panel can be against a high temperature of
1000°C for 4 hours.
Water Proof: Tests has proved that water containers can be made by Eps and
Cement sandwich panel without absorbing functions and no leakage at
all.
Sound Insulation: The inside of wall panel material (EPS polystyrene grain) has
fine sound insulation and sound-absorbing functions.
2. Space and Cost Saving
Space Saving: Eps and Cement sandwich wall panel with the thickness of
60mm-180mm, as a thin and solid new type construction material, it
will save a lot of construction space compared with the traditional
block.
Labor Cost Saving: As wall panel is easy and fast to construct.
Foundation Cost Saving: As the weight of wall panel is only 1/12 of traditional block, it
will save 2/3 cost on construction structure.
3. Easy Construction Process
Easy to Install: Using our installation material (EPS Foam and Cement Adhesive) is
easy to build house
Shorter Time: For a 50sq. house, using Eps and Cement sandwich wall panel,
three people can finish it within ONE day, while using traditional block, it will take at least SEVEN days with ONE WEEK to finish.
4. High Security performance
High Intension: Eps and Cement sandwich wall panel can be nailed directly or have
expansion bolt to lift and hang heavies, it can be covered by
ceramic tile, wall paper, wood panel, coating etc.
Earthquake Resistance: The Seismic performance of DQ Eps and Cement sandwich wall panel
is at a magnitude of 8.5.
Performance Index:
NO. | Item | National Standards | Testing Results |
60mm | 90mm | 120mm | 60mm | 90mm | 120mm |
1 | Anti-impact performance/times | ≥5 | ≥5 | ≥5 | ≥6 | ≥6 | ≥10 |
2 | Anti-bending damage load/times over deadweight | ≥1.5 | ≥1.5 | ≥1.5 | ≥3 | ≥3 | ≥3 |
3 | Anti-pressure strength /Mpa
| ≥3.5 | ≥3.5 | ≥3.5 | ≥6 | ≥6 | ≥6 |
4 | Surface density kg/m2 | ≤70 | ≤90 | ≤110 | ≤45 | ≤54 | ≤66 |
5 | Single point hanging Strength /N | ≥1000 | ≥1000 | ≥1000 | ≥1000 | ≥1200 | ≥1300 |
6 | Fire proof limit /h | ≥1 | ≥1 | ≥1 | ≥3 | ≥3 | ≥4 |
7 | Sound insulation capacity in the air /Db | ≥30 | ≥35 | ≥40 | ≥35 | ≥40 | ≥45 |
8 | Soften coefficient | ≥0.80 | ≥0.80 | ≥0.80 | ≥1 | ≥1 | ≥1 |
9 | Moisture rate a/% | ≤12 | ≤10 | ≤10 | ≤10 | ≤9 | ≤7 |
10 | Heat transfer coefficient w/m2.k | ≤2.0 | ≤2.0 | ≤2.0 | ≤1.0 | ≤0.6 | ≤0.5 |
11 | Drying shrinkage /mm/m | ≤0.6 | ≤0.6 | ≤0.6 | ≤0.45 | ≤.0.5 | ≤0.5 |
12 | Inner radiation index
| ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 |
13 | Outer radiation index
| ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 |
14 | Radioactivity Limit | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 |
Panel Sandwich Interior:
