New Style Flexible Ceramic Tiles 30 x 60 cm Split Face Brick for
Wall Decoration
Hubei Boyuejia Industrial Co., Ltd is a modernized new high-tech
enterprise integrated research, production, sale and installation
of new energy saving wall materials, facing decoration materials
and machinery. BOYUEJIA professionally supplies comprehensive
solutions for partition walls of modification works, kitchen, wash
room, facing materials for interior and exterior of building
walls.Products are promoted worldwide gradually.
1, Product Types:
2. Specification:
| Tile type | Flexible Wall Tiles |
| Size | 300x300mm,300x600,600x600,600x900,600x1200mm |
| Thickness | 2mm~3mm |
| Composition | plasticizer, clay and mineral powder, quartz sand etc, |
| Color | We can produce all kinds of color according to your requirement |
| Usage | Interior and Exterior wall decoration |
| Packaging: | Standard cartons |
| Delivery time | Within 15 days after received the payment |
| Payment terms | TT, L/C |
| Supply ability | 50000square meters per month |
| Remark | All kind of designs can be produced according to your requirements |
3. Applications:
| Flexible Wall Tiles | Indoor and outdoor decoration of office buildings, hospitals,
shops, restaurants, bars and other public buildings; |
| Particularly suitable for high-rise building exterior wall
insulation decoration; |
| All kinds of new and old building constructions of indoor and
outdoor decoration; |
| Interior and exterior wall decoration of family homes, luxury
apartments, villas etc; |
4. Installation Steps:
1)Spread Tile Adhesive mixture to the tiles
Snap the line, and stick cement adhesive mixture to back side of
the tiles. Adhesive mixture should be evenly applied and the
thickness should be 2-3 mm, and adhesive area should cover more
than 85%.
2)Fill the joints
The joints should be filled by special cement-based gap filler or
silicone adhesive meeting National Standard. The adhesive mixture
is not allowed to fill the joints directly to avoid alkali
efflorescence.
3)Point Joints
The joints should be made by copper rod, and the joints should be
dished, smooth, plump.
4)Clean wall tiles
Clean the dirt of joint filler or cement mortar on surface and
sides of the tiles before setting, mapping by dry sponge or
scratching by plaster trowel. Fabric cloth with water is not
allowed, or else resulting in alkali efflorescence.
5)Process Exterior Corners
1.Hitom edge is on the left side of the interface, with a smooth
seam sealant.
2.Make 45°Diagonal by rotary sander, and match two tiles correctly.
3.Lapping joints is not allowed at exterior joints when tiles are
thin. For lapping joints, 2-3 mm seam should be made at the
lapping. The seam should be filled by joint fillers and someone
must be put in charge of the work, then painted by coating of same
color.
