Fire proof 50 - 200 mm EPS Cement Sandwich Panel for Prefab House
Composite:
surface: reinforced calcium silicate board (Non asbestos)
core: EPS polystyrene foam + Cement + Sand
forming by one time compound
Advantages:
• Easy installation:
Easy to install, convenient for wire groove and water pipe inbuilt,
and casual for decoration.
• Shorten construction time:
For the same construction work, 3 workers can finish within
60minuts with this panel, while for traditional brick 12 workers 60
minutes.
• Saving space:
It can averagely increase extra 4.16 m2 area for100 m2 house.
• Saving cost:
Both labor cost and construction structure cost can be greatly
saved, for it's easy installation and light weight.
• Environmental protection:
raw materials do not include any harmful substances.
• High security performance:
It has higher anti-seismic and anti-impact performance than
traditional brick and other construction materials;
• Waterproof and Fire-proof
• Sound insulation
Specification:
| Length (mm) | Width (mm) | Thickness (mm) | Density (kg/m2) | Application | Appearance |
2270
2440
2700
3000 | 610 | 50 | 38±5 | Non-load bearing wall of houses and buildings | With reinforced calcium silicate board as face board, solid |
| 60 | 42±5 |
| 75 | 45±5 |
| 90 | 52±5 |
| 100 | 56±5 |
| 120 | 62±5 |
| 150 | 72±5 |
| 180 | 85±5 |
| 200 | 95±5 |
Application:
• Floor System:
It's much suitable for the floor plate of factory, workshop,
warehouse, etc.
• Roof System:
Solving the problem of roof leakage, reducing the use of roof
beam-column and improving security.
• Interior Partition System:
It has been widely applied to interior partition of high-rise
buildings, with the advantages of excellent fire-proof, best
hanging force and easy installation.
• Exterior Wall& Villa:
It's widely applied to various modular house, low buildings,
apartment, villas, and city house, etc.
Technical Index:
| NO. | Item | National Standards | Testing Results |
| 60mm | 90mm | 120mm | 60mm | 90mm | 120mm |
| 1 | Anti-impact performance/times | ≥5 | ≥5 | ≥5 | ≥6 | ≥6 | ≥10 |
| 2 | Anti-bending damage load/times over deadweight | ≥1.5 | ≥1.5 | ≥1.5 | ≥3 | ≥3 | ≥3 |
| 3 | Anti-pressure strength /Mpa | ≥3.5 | ≥3.5 | ≥3.5 | ≥6 | ≥6 | ≥6 |
| 4 | Surface density kg/m2 | ≤70 | ≤90 | ≤110 | ≤45 | ≤54 | ≤66 |
| 5 | Single point hanging Strength /N | ≥1000 | ≥1000 | ≥1000 | ≥1000 | ≥1200 | ≥1300 |
| 6 | Fire proof limit /h | ≥1 | ≥1 | ≥1 | ≥3 | ≥3 | ≥4 |
| 7 | Sound insulation capacity in the air /Db | ≥30 | ≥35 | ≥40 | ≥35 | ≥40 | ≥45 |
| 8 | Soften coefficient | ≥0.80 | ≥0.80 | ≥0.80 | ≥1 | ≥1 | ≥1 |
| 9 | Moisture rate a/% | ≤12 | ≤10 | ≤10 | ≤10 | ≤9 | ≤7 |
| 10 | Heat transfer coefficient w/m2.k | ≤2.0 | ≤2.0 | ≤2.0 | ≤1.0 | ≤0.6 | ≤0.5 |
| 11 | Drying shrinkage /mm/m | ≤0.6 | ≤0.6 | ≤0.6 | ≤0.45 | ≤.0.5 | ≤0.5 |
| 12 | Inner radiation index | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 |
| 13 | Outer radiation index | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 |
| 14 | Radioactivity Limit | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 |
